0 review(s) | Add your review
The Lopi Flush Wood large hybrid inbuilt wood heater is a large insert that features the exclusive clean burning Hybrid-Fyre™ technology. Hybrid-Fyre™ technology is a fusion of known wood combustion and stainless steel secondary combustion air tubes, with the addition of our catalytic assist technology. The net result is a super clean burning insert, with emissions of just 0.90 grams with hardwood. With the reduction in emissions comes almost zero carbon monoxide remaining through all burn cycles, which means more heat from less wood, and greater savings on your heating cost.
   

The Lopi Flush Wood large hybrid inbuilt wood heater is a large insert that features the exclusive clean burning Hybrid-Fyre™ technology. Hybrid-Fyre™ technology is a fusion of known wood combustion and stainless steel secondary combustion air tubes, with the addition of our catalytic assist technology.

Primary combustion burn occurs in the firebox with our secondary tubes re-burning gases before they leave the firebox. Subsequently, those same gases pass through a catalytic combustor leaving virtually no smoke to exit the appliance.

The net result is a super clean burning insert, with emissions of just 0.90 grams with hardwood. With the reduction in emissions comes almost zero carbon monoxide remaining through all burn cycles, which means more heat from less wood, and greater savings on your heating cost.

The Lopi Flush Wood large hybrid inbuilt wood heater takes clean burning to an unmatched level of efficiency. This insert will heat up to 300m2, with up to 12 hours burn times. The large fire box is 0.085 cubic metres in size and will accommodate a 610mm log.

The insert has been engineered to fit into many fireplace openings and is approved for both masonry and zero clearance fireplaces. It features a bypass damper for smoke free firestarting and reloading. A large viewing area is accomplished with a huge single cast iron door, giving the unit 319 square inches of glass.

The large insert comes standard with twin 90 CFM convection fans to increase heat output and efficiency. The rheostat controlling fan speed is located on the chosen face plate - not on the surround panel - and the power cord can be routed to either side of the appliance or hard wired inside the fireplace.

It also has the option of adding the Revolutionary GreenStart Option. GreenStart is a patent-pending ignition system for the modern wood burner; just load your wood and push a button. Say goodbye to slow startups and labouring over newspaper and firelighters.
 

Highlights:

  • Heats up to 30 squares
  • Includes Fan
  • Up to 67% average heating efficiency
  • available with Greenstart
  • Available with Zero Clearance

Write Your Own Review

Related Products